The TM250 is aimed at supporting air space surveillance for General Aviation, integrating Mode S, Mode A/C, ADS B, and FLARM®-Detection in one single cockpit device.
ADS-B data from other aircraft are decoded by the built-in Mode S receiver in the TM250. The display of the TM250 indicates the relative position of these airplanes as well as their vertical movement direction. Aircraft whose transponder does not broadcast ADS-B messages are also detected by the TM250. If possible, they are classified according to relative altitude. Approach of such targets is signaled on the display and acoustically.
The TM250 includes a built-in GPS receiver and can transmit its position data via a serial interface to an ADS-B capable Mode S transponder. This makes a complete ADS-B system.
Via a second serial interface, an external FLARM® receiver can be connected to the TM250 which then allows indicating of position and movement direction of FLARM® equipped airplanes on the display of the TM250.
If no FLARM® receiver is connected to the TM250, other nearby gliders that have a FLARM® transmitter onboard are still detected and indicated on the TM250 graphically and acoustically. This is achieved through a non-directed detection of the signal strength of nearby FLARM® transmitters inside the TM250. In this case however, it is not possible to indicate the direction, distance, altitude or position of such targets.
Without additional FLARM® system there is no transmission of signals to other gliders.
- Dimensions 65 x 65 x 110 mm
- Weight 300 g
- Power Supply Voltage 13,8 VDC (9-33 VDC)
- Current typ. < 250 mA
- Connectors GPS (BNC), 1090 MHz/FLARM (SMA), PC (Mini-USB)
- Compact traffic monitoring and warning system in 57 mm standard housing
- Complete ADS-B solution in combination with extended squitter-capable transponder (e.g. f.u.n.k.e. AVIONICS TRT800A/H)
- Reception of ADS-B position reports via Mode S
- Interface for external FLARM® receiver
- Easy operation
- Proximity warning for all aircraft equipped with Mode S or Mode A/C transponder resp. FLARM®
- Acoustic warning by internal buzzer and via external units (e.g. ATR833)
- Interface to external standard displays
- Low power consumption
- EASA Minor Change approval available
No customer reviews for the moment.